• مواصفات خريج القسم ومجال عمله :
  • القيام بعمليات تركيب وتجميع أجهزة التبريد والتكييف وتشغيلها.
  • عمل الصيانة الدورية لأجهزة التبريد والتكييف المختلفة.
  • كشف الاعطال وإصلاحها والاشراف علي تلك العمليات .
  • المساهمة تحت إشراف المهندس في أعمال تصميم أنظمة التبريد وتكييف الهواء.

   

BIO-DATA

Prof Haroun A K Shahad

Head of Department of Air Conditioning and Refrigeration Engineering Technologies

Name            : Prof. Dr. Haroun A.K. Shahad Nationality  :  IRAQI

Religion       : Muslim Age : 68 years

e-mail          :  hakshahad@yahoo.com

 haroon_abd@hillaunc.edu.iq

 Correspondence Address:

Haroun A. K.  Shahad College of Engineering University of Babylon Hilla P.O. Box 4 Babylon, IRAQ Married with 3 children

Mobil phone: 07801020557

Scientific Status

Professor of power engineering from 10th May 2006

Associate Prof.    1999 –2002 (Higher Institute of Mech. And Elect. Eng., Hoon /Libya)

Degrees obtained

Ph.D. University of Manchester (UMIST), England 1983 M.Sc. University of Manchester (UMIST), England 1980 B.Sc. in Mech. Eng.  University of Basrah, Iraq 1976

Administration Experience

Dean College of Eng. Univ. of Babylon (17-5-2003 till 31-12-2005) Head of Dept. of Mech. Eng. Univ. of Babylon (1993-1999).

Head of Dept. of Mech. Eng. Univ. of Basrah   (1990-1992). Assist. Dean, College of Eng. Univ. of Basrah   (1987-1988)

Computer Experience

I have a good computer experience in both software and programming. I supervised many graduation projects and M.Sc. dissertations where computer programs are developed to model many engineering problems.

Supervision

• More than 50 Sc. projects in the field of thermodynamics and internal combustion engines.
• Twenty Five Sc. dissertations in  the fields of internal combustion engines,  air pollution, solar energy, bio-fuel, hydrogen energy and thermodynamics.
• Ten D. students  in  the  fields  of  internal  combustion  engines  and  renewable energies.

Scientific Consultations

• Al-Mussaib power plant,
• Southern Cement Company, Kufa,
• General company for cars manufacturing,

University Activities

1- Head of energy committee in Basrah University in Iraq 1987-1990. 2- Head of energy committee in Babylon University in Iraq 1995-1997. 3- Referee for the International Journal of Hydrogen Energy.

• Member of the scientific committee of the Scientific Symposium on the Development of Engineering and Technical Education in the Beginning of the 21st Century, Hoon,
• Member of the Editorial Board of Babylon University
• Chairman of the scientific committee for the 1st annual scientific conference of the College of Engineering, University of Babylon 17-18/5/2009.
• Chief Editor of the Iraqi Journal for mechanical and Materials
• Member of the scientific committee for the 2nd annual scientific  conference of the College of Engineering, University of Babylon 24-25/3/2010.
• Member of the scientific committee for the 3rd annual scientific conference of the College of Engineering, University of Babylon 23-24/3/2011.
• Member of the Advisory Committee to the University 11-Member of Babylon University Committee for Renewable Energies

Teaching Experience

I thought the following courses for B.Sc., M.Sc. and Ph.D. degrees.

• Internal combustion engines   Year B.Sc.   Mech. Eng.
• Thermodynamics Year B.Sc.   Mech. Eng.
• Mathematics Year B.Sc.   Mech. Egg.
• Pollution control Year B.Sc. Chem. Eng. 5- Advanced engineering thermodynamics            M.Sc. degree

6- Thermodynamics of internal combustion engines       M.Sc. degree 7-Renewable Energies                                         Ph.D. degree

8-Theory of combustion                                                   Ph.D. degree

Conferences attended

• Second Basrah Conference for Mechanical Engineering Researches, Basrah/Iraq, 20-21 April,
• Fifth Scientific Conference of Babylon 25-27 April, 1999.
• Scientific Symposium on the Development of Engineering and technical Education in the Beginning of the 21st Century, Hoon, Libya
• First Scientific Conference, College of Technology, Najaf, 16-17/3/2008
• First Scientific Conference of the College of Engineering/ University of Babylon, 17- 18/5/2009.
• Nuclear and Renewable Energy Sources with International Participation, 28-29 Sept 2009, Ankara,
• Second Scientific Conference of the College of Engineering/ University of Babylon, 24-25/3/2010.
• The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27- 29 September 2010, Ammam-
• Third Scientific Conference of the College of Engineering/ University of Babylon, 23-24/3/2011.
• International Conference on Automotive and Mechanical Engineering April 27-29,

        2011, Venice, Italy.

• International Journal of Arts and Sciences Conference April 16-19, 2012, Paris, France
• Third international Scientific Conference, Najaf Technical College, IRAQ 20-21, 2013
• Third Iraq Oil and Gas Conference 28-29 2015, Maysan province, IRAQ.
• Babylon First International Engineering Conference, 22-23 2015, Hilla, IRAQ.

 Scientific Consultations

• Al-Mussaib power plant,
• Southern Cement Company, Kufa,
• General company for cars manufacturing,

Published researches

• An experimental investigation of soot particles size inside the combustion chamber of a diesel

Energy Convers. Mgmt. Journal, Vol. 29, No 2, pp. 141-149, 1989.

• An experimental study of fuel spray penetration using water rig modeling

Arabian Journal for Science and Engineering (AJSE), 1990.

• Radiative heat transfer calculations from soot clouds for a quiescent combustion chamber diesel

ASME winter annual meeting, Dec. 9-14, 1984.

4-A stochastic simulation model of oil spills fate and transport in the northern region of the Arabian Gulf.

Engineering and Technology Journal, Vol. 12, 1993. 5-Analysis of wind energy potential in Babylon region.

Second Basrah Conference for Mech. Engineering researches. Basrah, 20-21 April, 1993.

6-A  computer  modeling  of  oil  spill  from  Khur  Al-Aumaia  terminal  using  circles approach.

Second Basrah Conference for Mech. Engineering Researches. Basrah, 20-21 April, 1993.

7-A theoretical study of free spray penetration. Engineering and Technology Journal, 1989.

8-A modeling  study of soot release in diesel engines.

Engineering and Technology Journal, 1989.

9-A theoretical study of soot cloud emissivity inside the combustion chamber of a diesel engine.

Engineering and Technology Journal, 1988.

10-A  new  technique  to  separate  hydrocarbon  vapors  and  water  vapor  from  the recirculated blow off gases in petrol engines.

Military Engineering College Journal, 1995.

11-A diagnostic study of diesel engine faults using noise measurement technique.

Engineering and Technology Journal, Vol. 12, No. 12, 1993.

• Soot oxidation in diesel

Engineering and Technology Journal, Vol. 12, No. 10, 1993.

• Using date stone charcoal as a filtering medium for automobile exhaust

Energy Convers. Mgmt. Vol. 39, No. 12, pp. 1215-1222, 1998.

14-A  prediction  study  of  the  effect  of  hydrogen  blending  on  the  performance  and

pollutants emission of a four stroke spark ignition engine. International Journal of Hydrogen Energy

Vol. 24, Issue 4, 1999, pp. 363-375.

• Investigation of soot formation and temperature field in laminar diffusion flames of LPG-air

Energy Conversion and Management. Vol. 41, Issue 17, 2000, 1897-1916.

• An experimental study towards using ceramic materials to improve wear resistance of a diesel engine exhaust

Fifth Scientific Conference of Babylon University, 25-27 April, 1999.

17-A thermodynamic analysis of non-equilibrium heat transfer in semi-infinite media subjected to step change in temperature.

Energy Conversion & Management, Vol. 44, Issue 8, 2003, pp. 1373-1386.

18-A prediction study of a spark-ignition supercharged hydrogen engine.

Energy Conversion & Management, Vol. 44, No. 20, pp. 3143-3150, 2003

• “Optimization Study of Proton Exchange Membrane Fuel Cell Performance” Turkish Journal of Engineering and Environmental

An International Journal

2005; Vol. 29, No.4, pp.235-240.

ISSN: 1300-0160

• Developing A model to Study the Effect of Operating Pressure and Temperature on Voltage and Efficiency of Hydrogen Fuel

The Iraqi Journal for Mech. And Materials Eng. Vol. 6, No.1, 2006.

• Effect of Operating Conditions on the Performance of Al-Muthanna Cement Plant

The Iraqi Journal for Mech. And Materials Eng. Vol. 6, No.2, 2006.

• “Mechanical Failure in PEM Fuel Cells due to Cracks and Pin-holes Formation – A CFD Study”

1st Symposium on CFD Tools for Complex Applications. Libyan Petroleum Institute, National Oil Cooperation, Tripoli, Libya, December, 8, 2006.

• “Parametric and Optimization Study of a PEM Fuel Cell Performance Using Three – Dimensional Computational Fluid Dynamics Model”

Renewable Energy Journal. An International Journal.

The Official Journal of WREN. The Institute of Energy, UK Vol. 32, Number 7, 2007, pp.1077-1101

ISSN: 0960-1481

24-“Optimization  Study  of  a  PEM  Fuel  Cell  Performance  Using  3D  Multi-Phase Computational Fluid Dynamics Model”

Journal of Zhejiang University SCIENCE A. International Applied Physics & Engineering Journal Vol. 8, Number 2, 2007, pp.285-300

ISSN: 1009-3095

25- “Influence of the Design Parameters in a Proton Exchange Membrane (PEM) Fuel Cell on the Mechanical Behavior of the Polymer Membrane”

Energy & Fuels.

An American Chemical Society Journal, USA Vol.  21, Number 4, 2007, pp.2258-2267

ISSN: 0887-0624

26-“Modeling Optimizes PEM Fuel Cell Performance Using Three-Dimensional Multi – Phase Computational Fluid Dynamics Model”.

Energy Conversion & Management. An International Journal

Vol. 48, Issue 12, 2007, pp 3102-3119.

ISSN: 0196-8904

• “Effect of Operating Parameters on the Hygro-Thermal Stresses in Proton Exchange Membranes of Fuel Cells”.

International Journal of Hydrogen Energy.

Official J. of the Int. Association for Hydrogen Energy, USA Vol. 32, Issue 7, 2007, pp. 4510-4522

ISSN: 0360-3199

• “Effect of Design Parameters on the Hygro-Thermal Stresses in Proton Exchange Membranes of the Fuel Cells”

Engineering Applications of Computational Fluid Mechanics. An International Journal

Vol. 1 Number 2, 2007, pp. 71-87

ISSN: 1994-2060

• “Prediction of Hygro-Thermal Stresses Distribution in Proton Exchange Membranes Using Three-Dimensional Multi-Phase Computational Fluid Dynamics Model” Journal of Power and

Proc. of the Institution of Mechanical Engineers, UK Vol. 221, Number 7, 2007.

ISSN: 0957-6509

• “Optimum Operating Point of PEM Fuel Cells to Extract Peak Energy from Our Fuels”

Fuel Cell Magazine.

An International Magazine Vol. 8, 2007.

ISSN: 1539-1647

• “Numerical Analysis of a Proton Exchange Membrane Fuel Cell: Part Model Development”

Journal of Power and Energy.

Proc. of the Institution of Mechanical Engineers, UK Vol. 221, Number 7, 2007

ISSN: 0957-6509

• “Numerical Analysis of a Proton Exchange Membrane Fuel Cell: Part Parametric Study”. Journal of Power and Energy.

Proc. of the Institution of Mechanical Engineers, UK Vol. 221, Number 7, 2007.

ISSN: 0957-6509

33-“Behavior of the Proton Exchange Membranes in Fuel Cells Due to Hygro-Thermal Stresses”

Fuel Cell Magazine.   International Magazine Vol.  1, 2007

ISSN: 1539-1647

• “Three – Dimensional, Multi – Phase Flow, Computational Fluid Dynamics Model for Analysis of Transport Phenomena and Thermal Stresses in PEM Fuel Cells”

The    Third    International   Conference      on   Thermal     Engineering:      Theory       and Applications.

(Ryerson  University,  Canada  &  Hashemite  University,  Jordan),  Amman,  Jordan, May 21-23, 2007.

• “Efficiency and Economics of Proton Exchange Membrane Fuel Cells – A CFD Study”

Environmental Impact of Energy and Water Saving. First International Conference and Exhibition.

International Energy Foundation, Tripoli, Libya, May 30-31, 2007. PP. 179-191.

• “Modeling Optimizes PEM Fuel Cells to Extract Peak Energy from Our Fuels – A CFD Study”

International Conference on New Trends in Petroleum  Refining.

Ministry of Education and Research, Ovidius University of Constanta, Constanta, Romania, December 6-8, 2007.

37-“CFD Model for Analysis and Design of PEM Fuel Cells”

The Sixth Jordanian International Mechanical Engineering Conference (JIMEC’6). Philadelphia  University  &  Jordan  Engineers  Association,  Amman  –  Jordan, October 22 – 24, 2007.

38-A  Three  Dimensional  Computational  Fluid  Dynamics  Model  for  Analysis  of Transport Phenomena and Electrochemical Reactions in PEM Fuel Cells.

The Iraqi Journal for Mechanical and Materials Engineering Vol. 7, No.3 2007, pp. 159-176.

39- A Quasi- Dimensional Model to Study the Effect of Hydrogen Blending on the Pollutants Emission of a Medium Speed Diesel Engine.

1st Scientific Conf. Tech. College Najaf, PP 1-16, 16-17/3/2008.

• Ethanol as a Lead/MTBE Replacement for Spark Ignition Engines in

Ovidius University Annals of Chemistry Journal, Vol. 18- No. 1- pp. 22-30, 2007.

• Modeling Optimizes PEM Fuel Cells to Extract Peak Energy From Our Fuels- a CFD

Ovidius University Annals of Chemistry Journal, Vol. 18, No.1, pp. 31-36, 2007.

• Ethanol as an Octane Enhancer for the Commercial Gasoline

The Iraqi Journal for Mechanical and Materials Engineering Vol.8, No.2, pp.96-109, 2008.

• Production and Testing of Bio-diesel from Waste Cooking

5th International Conference on “Combustion, Incineration/Pyrolysis and Emission Control (i-CIPEC 2008)”

16-19 December 2008, Chiang Mai, Thailand

• One dimensional model for water management through the membrane of a hydrogen PEM fuel

The Iraqi Journal for Mechanical and Materials Engineering Vol.8, No.3, pp.237-248, 2008.

• A numerical investigation of the effect of hydrogen blending on the temperature field and pollutants emission of a four stroke spark ignition

The Iraqi Journal for Mechanical and Materials Engineering.

Special issue for the 1st  Scientific Conference of the College of                                                                                                         Engineering/ University of Babylon, No. C, PP. 465-483, 2009.

• Experimental investigation of using hydrogen blending to improve performance and to reduce pollutants emission of a spark ignition

Nuclear and renewable energy resources conference with international participation. 28-29 Sept. 2009, ANKARA, TYRKEY.

• Experimental and Numerical Study of Fin Heat Sinks

The Iraqi Journal for Mechanical and Materials Engineering, Vol.9, No.3, 2009.

48-A Modeling Study of the Effect of Hydrogen Addition on the Performance of A Medium Speed Four Stroke Diesel Engine.

The Iraqi Journal for Mechanical and Materials Engineering, Vol.9, No.3, 2009.

• The Effect of Spark Plug Location On Cylinder Pressure, Temperature Field And Pollutants

The Iraqi Journal for Mechanical and Materials Engineering, Vol.9, No.3, 2009.

• Effect of operating conditions on the performance and emissions of a diesel engine operated with hydrogen blended

The 2nd. Scientific Conference of the College of Engineering/ Babylon University, Babylon, 24-25/3/2010.

• Experimental Investigation of the Effect of Hydrogen Blending on the Concentration of Pollutants Emitted from a Four Stroke Diesel

The 7th Jordanian International Mechanical Engineering Conference (JIMEC’7), 27- 29 September 2010, Ammam- Jordan.

• Experimental Investigation of the Effect of Hydrogen Blending on the Concentration of Pollutants Emitted From a Four Stroke Diesel Engine

Jordan Journal of Mechanical and Industrial Engineering, Volume 5, Number1, February 2011

• Experimental Investigation Of The Effect Of Hydrogen Manifold Injection On The Performance Of A Compression Ignition Engine

International Conference on Automotive and Mechanical Engineering, Venice, Italy during April 27-29, 2011.

• Design, Construction and Testing of a Solar Air Heater in Iraq International Journal of Arts and Sciences Conference

April 16-19, 2012, Paris, France

• Design, Construction and Testing of a Solar Air Heater in Iraq Academic Journal of Science,

CD-ROM. ISSN: 2165-6282: 1(3):323–332 (2012)

Copyright c 2012 by UniversityPublications.ne

• Quazi Three Dimensional Analysis of Temperature Field inside the Flow Duct of Air Solar Heater.

Third International Scientific Conference, Najaf Technical College, 20-21/2/2013 57-Analysis of Recorded Metrological Data in Babylon Province of IRAQ during 2011.

The Iraqi Journal for Mechanical and Materials Engineering, Vol. 14, No. 2, 2014

58-A Numerical Investigation of the Effect of Hydrogen Blended on the Temperature Field and Performance of a Spark Ignition Engine

International Journal of Mining, Metallurgy & Mechanical Engineering (IJMMME) Volume 2, Issue 1 (2014) ISSN 2320–4060 (Online)

59-A Review on Hydrogen Supplementation in Compression Ignition Engines.

International Journal of Current Engineering and Technology, Vol. 5, No.2, (April 2015).

• Experimental Study to Improve Bio-ethanol Yield from Iraqi Dates

The Fourth Scientific conference For Engineering and Technology, 7-8 April 2015, University Islamic College, Najaf, Iraq.

• Effect of Operating Conditions on Pollutants Concentration Emitted From a Spark Ignition Engine Fuelled With Gasoline Bio-Ethanol

The Fourth Scientific conference For Engineering and Technology, 7-8 April 2015, University Islamic College, Najaf, Iraq.

• Performance Analysis of a Shallow Duct Flat Plate Solar Air Heater with and without porous University of Babylon Journal, Vol. 23, Issue 1, 2015.
• Effect of Operating Conditions on Pollutants Concentration Emitted from a Spark Ignition Engine Fuelled with Gasoline Bio-ethanol Journal of Renewable Energy, Vol. 2015.

64-A Review of Solar Powered Absorption Refrigeration Systems.

International Journal of Current Engineering and Technology, Vol. 5, No.2,   (April 2015).

• Investigation on an intermittent absorption refrigeration prototype powered by solar

Al-Qadisiyia Engineering Sciences Journal, Issue 4, Vol. 8, 2015.

• Experimental Study of Performance of a Spark ignition Engine Fuelled with Gasoline Bio-Ethanol Blends Produced from Iraqi

Babylon First International Engineering Conference, 22-23 Dec. 2015, Hilla, IRAQ.

• Production of Bio-Ethanol from Iraq Date

Third Iraq Oil and Gas Conference 28-29 Oct. 2015, Maysan province, IRAQ. 68- An Experimental Study of the Effect of Hydrogen Blending on Laminar Flame

Speed for Iraqi LPG.

Accepted for publication in the IJMME.

69- An Experimental Study for Investigating the Laminar Flame Speed and Burning Velocity for LPG.

International Journal of Thermal Technologies, Vol. 6, No.1 (March 2016) 70- Using Ammonia–Activated Carbon as Working Pair for Solar Adsorption

Refrigeration System

International Journal of Thermal Technologies. Vol.6, No.1 (March 2016)

• Improving Naphtha Octane Number by using UV Rays under Atmospheric Pressure International Journal of Current Engineering and

Vol. 6, No.6 (Dec 2016)

• An Experimental Investigation on performance and Emission of a Single Cylinder DI Diesel Engine with Manifold Hydrogen

Journal of Babylon University, Vol. 25, No 2, 2017.

• An Experimental Study of the Effect of Hydrogen Blending on Burning Velocity of LPG at Elevated

International Journal of Hydrogen Energy, Volume 41, Issue, 2016 74-Characteristics Review of Optical Concentrators

International Journal of Current Engineering and Technology Vol. 7, No. 1, 2017

75-A Review of Laminar Burning Velocity and Flame Speed of Gases and Liquid Fuels International Journal of Current Engineering and Technology

Vol. 7, No.1, 2017

• State of the Art of Solar Absorption Cooling Technologies

International Journal for Research in Applied Science & Engineering Technology, Volume 5, Issue III, March 2017

• Photo-degradation Effect on Naphtha Octane Number by Using UV Radiation International Journal of Thermal Technologies, March, 2017

78-Design and Fabrication of Two Dimension Compound Parabolic Concentrator for Iraqi Climate

International Journal for Research in Applied Science & Engineering Technology (IJRASET), Volume 5 Issue V, May 2017

79-Effect of Duct Design Configuration on Solar Air Heater Performance in Iraq Weather Conditions.

Fourth Iraq Oil and Gas Conference 13-14 Dec.2017

80-Photo-degradation Effect on Naphtha Octane Number by Using UV Radiation Fourth Iraq Oil and Gas Conference 13-14 Dec.2017

• Experimental Study of Effect of Nanoparticles Addition on Combustion Phasing in Diesel Engine

International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol, 18 No, 01

• Analysis of the experimental and theoretical performance of the non-imaging compound parabolic solar

Indian Journal of Science and Technology Vol. 11, Issue 12, March 2018

• Experimental Study of a Diesel Engine performance Fuelled with Different Types of Nano-Fuels.

Journal of University of Babylon Vol.26, No. 7, 2018

• Experimental Investigation of Pollutants Emission for a Diesel Engine Fuelled with Nano-Fuels.

Journal of University of Babylon Vol.26, No. 6, 2018

• Overview of Working Pair used in Absorption Refrigeration Technologies International Journal for Research in Applied Science & Engineering Technology (IJRASET)

ISSN: 2321-9653; IC Value: 45.98; SJ Impact Factor: 6.887

Volume 6 Issue VII, July 2018

• The Effect of Compression Ratio on Pollutants Emission of a Diesel Engine Fuelled with Nano

International Journal of Engineering and Technology Vol. 7, No 4.19 (2018), Special Issue 19, Pages: 828–833, DOI: 10.14419/ijet.v7i4.19.28005

• Experimental Performance Investigation of Photovoltaic Module and Water Cooled Photovoltaic/Thermal System under Middle of Iraqi Climatic Conditions.

International Journal of Engineering and Technology

Vol. 7, No 4.19 (2018), Special Issue 19, Pages: 688-698,

  DOI: 10.14419/ijet.v7i4.19.27984

• Performance Experimental Study of Dual Fluid (Air-Water) Flat Plate Solar

Journal of University of Babylon, Vol. 27, Issue 4, 2019

• Improving the electrical efficiency of photovoltaic/thermal panel by using SiC/Water nano-fluid as

Third International Conference on Engineering Sciences, 4 – 5 November, 2019 in the Engineering College at University of Kerbala, Iraq.

• Effect of Operating Conditions on Performance and Emissions of A Diesel Engine Operated with Diesel-Hydrogen

The Iraqi Journal for Mechanical and Materials Engineering, Vol. 19, Issue 4, 2019 91-: Experimental Investigation of Blending Fuel Type Effect on Laminar Flame Speed

at Elevated Initial Pressure

ISCUB-2019 International Scientific conference of the university of Babylon December 1-2, 2019 University of Babylon, Babylon, Iraq

TEST Engineering & Management magazine, Vol. 83, March/April 2020

92-Acetone – Zinc Bromide as Working Fluids in Solar Absorption Cooling System Basrah Journal of Engineering Sciences, Vol. 20, No. 1, (2020), 23-29

93-Experimental and CFD Simulation for Two Different Configuration of Flat Plate Solar Collector

ISCUB-2019 International Scientific conference of the University of Babylon December 1-2, 2019 University of Babylon, Babylon, Iraq

TEST Engineering & Management magazine, Vol. 83, March/April 2020

• Investigation of Flame Flashback Phenomena in LPG-H2/Air Premixed Combustion Using Boundary and Peclet Number

ISCUB-2019 International Scientific conference of the University of Babylon December 1-2, 2019 University of Babylon, Babylon, Iraq

TEST Engineering & Management magazine, Vol. 83, March/April 2020

• An Experimental Investigation on Thermal Performance and Exhaust Gas of CI Engine Fuelled by Diesel-Ethanol Blended with Waste Oil Biodiesel as Co-Solvent.

ISCUB-2019 International Scientific conference of the University of Babylon December 1-2, 2019 University of Babylon, Babylon, Iraq

TEST Engineering & Management magazine, Vol. 83, March/April 2020

• Design, Fabrication and Performance Testing of PTC with Helical Coil Receiver, 4th Scientific International Conference Najaf (SICN), Al-Najef, Iraq, 2019, pp. 189-194. org/10.1109/SICN47020.2019.9019342
• Overview of Solar Assisted Cooling Technologies

International Journal of Applied Engineering Research ISSN 0973-4562 Volume 15, Number 8 (2020) pp. 843-863

• Experimental Investigation of Iraqi Liquefied Petroleum Gas (ILPG)//Air

Premixed Flame Stability Zone

1. Eng. Technol. Sci., Vol. 52, No. 5, 2020

• Using Solar Collector Unit in a Methanol Water Vapor Absorption Cooling System Under Iraqi Environmental

Case Studies in Thermal Engineering Volume 22, December 2020, 100749

• Optimization of Performance and Emission Responses for a CIE Run by MeOH/Biodiesel/Diesel Blends Utilizing Response Surface Methodology

1st International Conference on Sustainable Engineering and Technology: INTCSET 2020.

Journal of Material Sciences and Engineering 2021 IOP Conf. Ser.: Mater. Sci. Eng. Vol. 1094

• Experimental Study on Diesel Engine Characteristic Utilized Low Carbon Alcohols

1st International Conference on Sustainable Engineering and Technology: INTCSET 2020.

Journal of Material Sciences and Engineering: IOP Conference Series

102-A Numerical And Experimental Analysis Of Laminar Flame Speed For Pre-Mixed Iraqi Lpg/Air Mixture In A Horizontal Cylindrical Combustion Chamber

Journal of Mechanical Engineering Research and Developments

Vol. 44, No. 1, pp. 176-189,  Published 2021

• Measurements and Data Analysis Review of Laminar Burning Velocity and Flame Speed for Biofuel/Air Mixtures

1st International Conference on Sustainable Engineering and Technology: INTCSET 2020.

Journal of Material Sciences and Engineering: IOP Conference Series, Vol. 1094, 2021

• Effect of Combustion Chamber Size on Stretched and Un-stretched Laminar Flame Speed for Premixed Methane/Air Mixtures Using Schlieren Photography

1st International Conference on Sustainable Engineering and Technology: INTCSET 2020.

Journal of Material Sciences and Engineering: IOP Conference Series

• Parametric Theoretical Study of Solar Assisted Cooling System Using Lithium Bromide- Water Pair

2nd International Scientific Conference of Al-Karkh University of Science (ISC2/KUS2020)

ICOREMT 2021

IOP Conf. Series: Earth and Environmental Science 877 (2021) 012020, IOP Publishing doi:10.1088/1755-1315/877/1/012020

• Investigating the impact of using nano-fluid as a cooling medium on photovoltaic/thermal panel system performance

4th International Conference on Engineering Sciences (ICES 2020)

IOP Conf. Series: Materials Science and Engineering 1067 (2021) 012118 IOP Publishing

doi:10.1088/1757-899X/1067/1/012118

• Experimental Investigation of Al2O3nano Particles Effect on Soot Release and Morphology Emitted from A Diesel Engine

Design Engineering (Toronto) Issue 8 2021 PP 1904-1920

• Effect of Nano-Particles on Soot release in Diesel Engine- Review IOP Journal of Physics -2022
• Experimental study on the un-stretched laminar flame speed and Markstein length of premixed methane/air flames at different initial temperatures and

Design Engineering (Toronto), Issue 8, 2021, 13357-13373.

• Effect of Propane-Methanol Blending Ratio on the Stretched and Unstretched Flame Speeds at Elevated Initial

FME Transactions (2022) 50, 121-130 Faculty of Mechanical Engineering, Belgrade.

• Effect of Stoichiometric Ratio on Flame Characteristics for Propane-Methanol Blends at Elevated Initial

Journal of Thermal Engineering      16/10/21                                                         acceptance Yildiz Technical University, Turkey

• Effect of Combustion Chamber Volume on the Un-stretched Flame Speed for Premixed Methane/Air Mixture Using Schlieren Photography

Engineering and Technology Journal,   30/11/21   acceptance University of Technology, IRAQ

• Simulation of Ventilation Parameters for an Office Room with Displacement

International Journal of mechanical Engineering,  acceptance 12-1-202

114-A Review on Flame Height and Structure and Pollutants Formation

Neuro Quantology | Jul 2022 | Volume 20 | Issue 7 | Page 2946-2968 | doi: 10.14704/nq.2022.20.7.NQ33373

115-Effect of Operating Conditions on Modified Kalina Cycle Performance International Journal of Heat and Technology

Vol. 40, No. 5, October, 2022, pp. 1186-1195 Journal homepage: http://iieta.org/journals/ijht

116-State of the Art of Fuel Droplet Evaporation

          International Journal of Heat and Technology Vol. 40, No. 5, October, 2022, pp. 1327-1339

Journal homepage: http://iieta.org/journals/ijht

117-An Investigation into Burner Configuration Effects on Premixed Flame Characteristics for LPG Diluted with CO₂

Applied Mechanics and Materials Vol. 914, May 2023

118-Experimental Study on the Effect of Hydrogen Addition on the Laminar Burning Velocity of Methane/Ammonia–Air Flames

May 2023 Applied Sciences 13(10):5853 DOI: 10.3390/app13105853

119- Kalina Cycle System ( a State of the Art)

         AIP Conference proceedings, 2977,030018 (2023)

120- Thermodynamics Analysis of Ammonia Mass Fraction Effect on Simple Kalina Cycle System Performance,

          AIP Conference proceedings, 2977,020111 (2023)

Published books

1-Introduction To Internal Combustion Engines (Translated From English)

2-Thermodynamics Theory And Applications (In Arabic)

3-Engineering Thermodynamics Through Solved Problems”

4-Hydrogen –Diesel Blending In Compression Ignition Engines (Printed By Lambert)

5-Absorption And Adsorption Cooling Systems (Printed By Scholars Press)

6-A Thermodynamic Study Of A Thermosiphon Loop Heat Pipe (Printed By Lambert

7-Experimental And Theoretical Study Of (Acs) With Solar Collector (Printed By Lambert)

Prof . Dr. Haroun A K Shahad